Chapter 2 Programming with Help Function
Please read before programming
When the lamp on the button
different functions. They are called 'icons'. This chapter describes the method of programming with icons.
The following panel keys are used in Help mode.
Press this key to start/end a
program.
Refer to "Turning power OFF"
(Page 11).
Press this key to return to the
previous step or when a setting
is canceled.
Press this key to return to the
corresponding submenu.
This key may be used
similarly as
18
is lit, small pictures appear on the display. These pictures represent
?
Panel description and usage
.
BAS-Programmer
?
ESC
7
8
F
P
M
R
4
5
C
E
1
2
LI
L
0
Programmer
Messages and program
description are displayed here.
Press this key and turn on the
key lamp for programming
with the help function.
Press this key to check setting.
9
6
Press these keys to input
numerical values.
3
Press these keys to go to the
following steps or to select
ON/OFFF setting.
Press these keys to go to the
following steps or to move the
needle.