Profile Interface Configuration - Motorola WiNG 5.5 Reference Manual

5 - 20 WiNG 5.5 Access Point System Reference Guide
Dot1x Guest VLAN
Control
MAC Authentication
AAA Policy
6. Select OK to save the changes to the 802.1x configuration. Select

5.2.5 Profile Interface Configuration

System Profile Configuration
A access point profile can support customizable Ethernet port, virtual interface, port channel, radio and PPPoE configurations
unique to each supported access point model.
A profile's interface configuration process consists of the following:
• Ethernet Port Configuration
• Virtual Interface Configuration
• Port Channel Configuration
• Access Point Radio Configuration
• WAN Backhaul Configuration
• PPPoE Configuration
Additionally, deployment considerations and guidelines for profile interface configurations are available for review prior to
defining a configuration that could significantly impact the performance of the network. For more information, see
Backhaul Deployment Considerations on page
Select this option to globally enable 802.1x guest VLANs for the selected device. This
setting is disabled by default.
Use the drop-down menu to select an AAA authentication policy for MAC address
authentication. If a suitable MAC AAA policy does not exist, click the Create icon to create
a new policy or the Edit icon to modify an existing policy.
5-53.
Reset to revert to the last saved configuration.
WAN