Gre Tunnels - Motorola WiNG 5.5 Reference Manual

13 - 98 WiNG 5.5 Access Point System Reference Guide
The LDAP Agent Status
LDAP Agent Primary
LDAP Agent Secondary
Message
Status
Refresh

13.3.19 GRE Tunnels

Access Point Statistics
Generic Routing Encapsulation (GRE) is one of the available tunneling mechanisms which uses IP as the transport protocol and
can be used for carrying many different passenger protocols. The tunnels behave as virtual point-to-point links that have two
endpoints identified by the tunnel source and tunnel destination addresses at each endpoint.
To review a selected access point's GRE statistics:
1. Select the Statistics
2. Select System
connected access points.
3. Select GRE Tunnels.
Figure 13-61 Access Point - LDAP Agent Status screen
screen displays the following:
Lists the primary IP address of a remote LDAP server resource used by the access point to
validate PEAP-MS-CHAP v2 authentication requests. When a RADIUS server policy's data
source is set to LDAP, this is the first resource for authentication requests.
Lists the secondary IP address of a remote LDAP server resource used by the access point
to validate PEAP-MS-CHAP v2 authentication requests. When a RADIUS server policy's
data source is set to LDAP, this is the second resource for authentication requests.
Displays any system message generated in the access point's connection with the primary
or secondary LDAP agent. If there's a problem with the username and password used to
connection to the LDAP agent, it would be listed here.
Displays whether the access point has successfully joined the remote LDAP server
domain designated to externally validate PEAP-MS-CHAP v2 authentication requests.
Select Refresh to update the statistics counters to their latest values.
menu from the Web UI.
from the navigation pane (on the left-hand side of the screen). Expand a RF Domain and select one of its