Motorola WiNG 5.5 Reference Manual page 263

Table of Contents

Advertisement

5. Set the following
Configuration
System Name
Latitude Coordinate
Longitude Coordinate
Area
Floor
6. Refer to the
Device Overrides
Clear Overrides
button to clear all device overrides and reset the configuration to its default values.
7. Refer to the
Set Clock
field to update the system time.
Figure 5-111 Device Overrides - Basic Configuration screen
settings for the target device:
Provide the selected device a system name up to 64 characters in length. This is the
device name that appears within the RF Domain or Profile the access point supports and
is identified by.
Optionally provide the latitude coordinate where the device is located. The valid value for
this field is in the range -90.0000 degrees to +90.0000 degrees. When provided, this
enables the device to be mapped on the geolocation map.
Optionally provide the longitude coordinate where the device is located. The valid value
for this field is in the range -180.0000 degrees to +180.0000 degrees. When provided, this
enables the device to be mapped on the geolocation map.
Assign the access point an Area representative of the location the access point is
physically deployed. The name cannot exceed 64 characters. Assigning an area is helpful
when grouping access points in profiles, as access points in the same physical
deployment location may need to share specific configuration parameters in respect to
radio transmission and interference requirements specific to that location.
Assign the target access point a building Floor name representative of the location the
access point was physically deployed. The name cannot exceed 64 characters. Assigning
a building floor name is helpful when grouping devices in profiles, as devices on the same
physical building floor may need to share specific configuration parameters in respect to
radio transmission and interference requirements specific to that location.
field to assess whether overrides have been applied to the device's configuration. Use the
Device Configuration 5 - 177

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents