Table of Contents

Advertisement

13 - 20 WiNG 5.5 Access Point System Reference Guide
Radio Count
IP Address
Refresh

13.2.4 AP Detection

RF Domain Statistics
The AP Detection screen displays information about detected access points that are not members of a RF Domain. The could
be authorized devices or potential rogue devices.
To view device information on detected access points:
1. Select the
Statistics
2. Select a RF Domain from under the
3. Select
AP Detection
The
AP Detection
BSSID
Channel
SSID
Displays the number of radios on each listed device. AP7131N models can support from
1-3 radios depending on the hardware SKU. AP6532, AP6522, AP6562, AP71xx, AP8132
and AP8232 models have two radios. AP6511 and AP6521 models have one radio. An
ES6510 is a controller or service platform-manageable Ethernet Switch, with no
embedded device radios.
Displays the IP address each listed device is using a network identifier.
Select the Refresh button to update the statistics counters to their latest values.
menu from the Web UI.
System
node on the top, left-hand side, of the screen.
from the
RF Domain
menu.
Figure 13-11 RF Domain - AP Detection screen
screen displays the following:
Displays the Broadcast Service Set ID (SSID) of the network to which the detected access
point belongs.
Displays the channel of operation used by the detected access point. The channel must
be utilized by both the access point and its connected client and be approved for the target
deployment country.
Displays the Service Set ID (SSID) of the network to which the detected access point
belongs.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents