Motorola WiNG 5.5 Reference Manual page 280

5 - 194 WiNG 5.5 Access Point System Reference Guide
6. Refer to the Basic Configuration
configuration, and optionally assign/remove overrides to and from specific parameters.
Location
Contact
Time Zone
Country Code
7. Refer to the Statistics
Window Index
Sample Interval
Window Size
8. Click + Add Row
Figure 5-122 Device Overrides -RF Domain Overrides screen
NOTE: A blue override icon (to the left of a parameter) defines the parameter as having
an override applied. To remove a device's override, go to the Basic Configuration screen's
Device Overrides field, and then select the Clear Overrides button.
field to review the basic settings defined for the target device's RF Domain
Set the deployment location for the access point as part of its RF Domain configuration.
Set the administrative contact for the access point. This should reflect the administrator
responsible for the access point's configuration and wireless network.
Use the drop-down menu to select the geographic time zone supporting its deployment
location.
Use the drop-down menu to select the country code supporting its deployment location.
field to set the following:
Use the spinner control to set a numerical index used as an identifier for each RF Domain
statistics configuration defined.
Use the spinner control to define the interval (in seconds) used to capture statistics
supporting the listed RF Domain configuration. The default is 5 seconds.
Use the spinner control to set the number of samples used to define RF Domain statistics.
The default value is 3 samples.
button to add upto two (2) rows to the Statistics field.