Motorola WiNG 5.5 Reference Manual page 318

5 - 232 WiNG 5.5 Access Point System Reference Guide
including twisted pair or fiber optic lines or satellite transmission. It uses a variation of High Speed Data Link Control (HDLC)
for packet encapsulation. For a list of supported 3G cards, see
To define a WAN Backhaul configuration override for a supported access point:
1. Select Devices
2. Select Device Overrides
3. Select a target device from the device browser in the lower, left-hand, side of the UI.
4. Select Interface
5. Select WAN Backhaul.
NOTE: A blue override icon (to the left of a parameter) defines the parameter as having
an override applied. To remove an override, go to the Basic Configuration screen's
Device Overrides
from the device.
6. Refer to the WAN (3G) Backhaul
WAN Interface Name
from the Configuration tab.
from the Device menu to expand it into sub menu options.
to expand its submenu items
Figure 5-144 Device Overrides - WAN Backhaul screen
field and select
configuration to specify WAN card settings:
Displays the WAN Interface name for the WAN 3G Backhaul card.
WAN Backhaul Configuration on page
Clear Overrides. This will remove all overrides
5-51.