Motorola WiNG 5.5 Reference Manual page 630

9 - 20 WiNG 5.5 Access Point System Reference Guide
13. Define the following
Client Identifier Type
Value
IP Address
Domain Name
Boot File
BOOTP Next Server
Figure 9-11 Static Bindings Add screen
General parameters required to complete the creation of the static binding configuration:
Use the drop-down menu whether the DHCP client is using a Hardware Address or Client
Identifier as its identifier type with a DHCP server.
Provide a hardware address or client identifier value to help differentiate the client from
other client identifiers.
Set the IP address of the client using this host pool. Select Alias to use a network alias
with the IP address configuration. For more information see
Provide a domain name of the current interface. Domain names aren't case sensitive and
can contain alphabetic or numeric letters or a hyphen. A fully qualified domain name
(FQDN) consists of a hostname plus a domain name. For example,
computername.domain.com. Select Alias to use a string alias with the domain name
configuration. For more information see
Enter the name of the boot file used with this pool. Boot files (Boot Protocol) can be used
to boot remote systems over the network. BOOTP messages are encapsulated inside UDP
messages so requests and replies can be forwarded. Each DHCP network pool can use a
different file as needed
Provide the numerical IP address of the server providing BOOTP resources. Select Alias to
use a network alias with the BOOTP Next Server configuration. For more information see
Alias on page 7-34.
Alias on page
Alias on page 7-34.
7-34.