Motorola WiNG 5.5 Reference Manual page 89

4. Define the following Basic Configuration
Location
Contact
Time Zone
Country
Controller Managed
5. Refer to the Smart Scan
Enable Dynamic Channel
2.4 GHz Channels
5.0 GHz Channels
6. Refer to the Statistics field to define how RF Domain statistics are updated.
Update Interval
7. Select the Add Row button to add a new row to the
Window Index
Sample Interval
Window Size
To delete a row in the Statistics
8. Use the Initial Setup Wizard
the Initial Setup Wizard on page
9. Select OK to save the changes to the Basic Configuration, or select
values for the access point RF Domain:
Assign the physical location of the RF Domain. This name could be as specific as the floor
of a building, or as generic as an entire site. The location defines the physical area where
a common set of access point configurations are deployed and managed by the RF Domain
policy.
Provide the name of the contact E-mail (or administrator) assigned to respond to events
created by or impacting the RF Domain.
Set the geographic time zone for the RF Domain. The RF Domain can contain unique
country codes and time zone information to access points deployed across different states
or countries, thus making them ideal for managing device configurations across different
geographical deployments.
Define the two-digit country code set for the RF Domain. The country code must be set
accurately to avoid the policy's illegal operation, as device radios transmit in specific
channels unique to the country of operation.
Select the option to indicate this RF Domain is managed by adopting controllers or service
platforms. This option is disabled by default.
field to define the channels for smart scan.
Select the option to enable dynamic channel scan.
Use the Select drop-down menu to select channels to scan in the 2.4 GHz band. Selected
channels are highlighted with a grey background. Unselected channels are highlighted
with a white background. Multiple channels can be selected at the same time.
Use the Select drop-down menu to select channels to scan in the 5.0 GHz band. Selected
channels are highlighted with a grey background. Unselected channels are highlighted
with a white background. Multiple channels can be selected at the same time.
Set a statistics update interval of 0 or 5-3600 seconds for updates retrieved from the
access point.
Statistics
Use the spinner control to set a numerical index used as an identifier for each RF Domain
statistic defined.
Use the spinner control to define the interval (in seconds) used by the access point to
capture windowed statistics supporting the RF Domain configuration. The default is 5
seconds.
Use the spinner control to set the number of samples used by the controller to define RF
Domain statistics. The default value is 3.
update table, select the
to configure the device. For more information on using the
3-2.
update table.
Delete icon next to the row in the table.
Reset to revert to the last saved configuration.
Device Configuration
Initial Setup Wizard, see
5 - 3
Using