Motorola WiNG 5.5 Reference Manual page 348

5 - 262 WiNG 5.5 Access Point System Reference Guide
Figure 5-162 Device Overrides - Network - OSPF Virtual Interface - Basic Configuration screen
24. Within the Properties
configuration used with this OSPF route. Enable/disable admin privileges as need. They're disabled by default.
25. Use the IP Addresses Area
Zero Configuration can be enabled and set as the Primary or Secondary means of providing IP addresses for the OSPF virtual
route. Zero configuration (or zero config) is a wireless connection utility included with Microsoft Windows XP and later as
a service dynamically selecting a network to connect based on a user's preferences and various default settings. Zero config
can be used instead of a wireless network utility from the manufacturer of a computer's wireless networking device. The
drivers for the wireless adapter query the NDIS Object IDs and pass the available network names (SSIDs) to the service.
The service then lists them in the user interface on the
Wireless Network Connection dialog box accessible from the notification area. A checked build version of the WZC service
can be used by developers to obtain additional diagnostic and tracing information logged by the service.
26. Select Use DHCP to Obtain IP
addresses to the OSPF route's virtual interface.
27. Select Use DHCP to Obtain Gateway/DNS Servers
just this interface. Once selected, specify an IP address and mask in dot decimal format.
28. Define the NAT Direction
• Inside - The inside network is transmitting data over the network its intended destination. On the way out, the source IP
address is changed in the header and replaced by the (public) IP address.
field, enter a 32 character maximum Description to help differentiate the virtual interface
to set how route addresses are created for the virtual configuration.
to use a the access point's DHCP server resource as the means of providing requested IP
as either Inside, Outside or None.
Wireless Networks tab in the connection's Properties or in the
to learn default gateway, name servers and the domain name on