Configuring Auto Shutdown Settings - Motorola WiNG 5.5 Reference Manual

6.1.9 Configuring Auto Shutdown Settings

Wireless LANs
Auto shutdown provides a mechanism to regulate the availability of a WLAN based on time. WLANs can be enabled or disabled
depending on the day of the week and time of day.
A WLAN can be made available during a particular time of the day to prevent misuse and reduce the vulnerability of the
wireless network. WLANs can be disabled when there are no users on the network, such as after hours or during the weekends/
holidays. This enables the network administrator to have more time to manage the network as the mundane task of shutting
down/staring up a WLAN is automated.
You can also use the Auto Shutdown screen to configure network parameters, which if not met, can force the WLAN to shut
down. These parameters are:
• Shutdown on Mesh Point Loss – If an access point is a member in a meshed network and its connection to the mesh is lost,
then all WLANs on the access point that have this option enabled are shut down.
• Shutdown on Primary Port Link Loss – When there is a loss of link on the primary wired link on the access point, all the
WLANs on the access point that have this option enabled are shut down.
• Shutdown on Critical Resource Down – If critical resource monitoring is enabled on the access point and one or all of the
monitored critical resource goes down, the all WLANs on the access point that have this option enabled are shut down.
• Shutdown on Unadoption – If the access point is unadopted from its wireless controller, then all WLANs on the access point
that have this option enabled are shut down.
To configure auto shutdown parameters for the selected WLAN:
1. Select the Configuration
2. Select Wireless.
3. Select Wireless LANs
4. Select the Add button to create an additional WLAN, or
5. Select Auto Shutdown.
tab from the Web UI.
to display a high level display of existing WLANs.
Edit to modify the properties of an existing WLAN.
Wireless Configuration 6 - 45