Table of Contents
Advertisement
22. Set the following
Dynamic Sample Recovery
Dynamic Sample
Enabled
Dynamic Sample Retries
Dynamic Sample
Threshold
23. Select
OK
to update the Smart RF Neighbor Recovery settings. Select
24. Select the
Interference Recovery
Figure 6-36 SMART RF Recovery Configuration screen - Interference Recovery tab
25. Set the following
Interference Recovery
Interference
Noise
parameters:
Select this option to enable dynamic sampling. Dynamic sampling enables an
administrator to define how Smart RF adjustments are triggered by locking retry and
threshold values. This setting is disabled by default.
Use the spinner control to set the number of retries (1 - 10) before a power change is
allowed to compensate for a potential coverage hole. The default setting is 3.
Use the spinner control to set the number of sample reports (1 - 30) used before dynamic
sampling is invoked for a potential power change adjustment. The default setting is 5.
tab.
parameters:
Select this radio button to allow Smart RF to scan for excess interference from supported
radio devices. WLANs are susceptible to sources of interference, such as neighboring
radios, cordless phones, microwave ovens and Bluetooth devices. When interference for
WiFi sources is detected, Smart RF supported devices can change the channel and move to
a cleaner channel. This feature is enabled by default.
Select this radio button to allow Smart RF to scan for excess noise from WiFi devices. When
detected, Smart RF supported access points can change their channel and move to a cleaner
channel. This feature is enabled by default.
Wireless Configuration 6 - 83
Reset
to revert to the last saved configuration.
Hide quick links:
Advertisement
Table of Contents
