Table of Contents
Advertisement
Allowed VLANs
11. Optionally select the
Port Channel Membership
control. This sets the channel group for the port.
12. Select
OK
to save the changes made to the Ethernet Port Basic Configuration. Select
configuration.
13. Select the
Security
tab.
14. Refer to the
Access Control
are required. The configuration can be optionally overridden if needed.
15. Use the
IP Inbound Firewall Rules
apply to this profile's Ethernet port configuration.
The firewall inspects IP and MAC traffic flows and detects attacks typically not visible to traditional wired firewall
appliances.
16. If a firewall rule does not exist suiting the data protection needs of the target port configuration, select the
define a new rule configuration. For more information, see
17. Refer to the
Trust
field to define the following:
Trust ARP Responses
Selecting Trunk as the mode enables the Allowed VLANs parameter. Add VLANs that
exclusively send packets over the listed port.
option and define (or override) a setting from 1 - 8 using the spinner
Figure 5-129 Ethernet Ports - Security screen
field. As part of the port's security configuration, Inbound IP and MAC address firewall rules
and
MAC Inbound Firewall Rules
Select this option to enable ARP trust on this port. ARP packets received on this port
are considered trusted and information from these packets is used to identify rogue
devices within the network. The default value is disabled.
Reset
drop-down menus to select the firewall rules to
Wireless Firewall on page
8-2.
Device Configuration 5 - 207
to revert to the last saved
Create
icon to
Hide quick links:
Advertisement
Table of Contents
