Motorola WiNG 5.5 Reference Manual page 710

12 - 28 WiNG 5.5 Access Point System Reference Guide
Protocol
Port
IP Address
Hostname
Path/File
User Name
Password
Target
If Advanced is selected, choose the protocol for file management. Available options
include:
• tftp
• ftp
• sftp
• http
• cf
• usb1
• usb2
• usb3
• usb4
This parameter is required only when Server is selected as the Source and Advanced
is selected.
If Advanced is selected, specify the port for transferring files. This option is not
available for cf, usb1, usb2, usb3 and usb4. Enter the port number directly or use the
spinner control.
This parameter is required only when Server is selected as the Source.
If Advanced is selected, specify the IP address of the server used to transfer files.
This option is not valid for cf, usb1, usb2, usb3 and usb4. If IP address of the server
is provided, a Hostname is not required.
This parameter is required only when Server is selected as the Source.
If needed, specify a Hostname of the server transferring the file. This option is not
valid for cf, usb1, usb2, usb3 and usb4. If a hostname is provided, an IP Address is
not needed.
This field is only available when Server is selected in the From field.
If Advanced is selected, define the path to the file on the server. Enter the complete
relative path to the file.
This parameter is required only when Server is selected as the Source.
If Advanced is selected, provide a user name to access a FTP or SFTP server.
This parameter is required only when Server is selected as the Source, and the
selected protocol is ftp or sftp.
If Advanced is selected, provide a password to access the FTP or SFTP server.
This parameter is required only when Server is selected as the Source, and the
selected protocol is ftp or sftp.
If Advanced is selected, set the target destination to transfer the file using FTP or
SFTP.
• Select Server if the destination is a remote server, then provide a URL to the
location of the server resource or select Advanced and provide the same network
address information described above.
• Select Access Point if the destination is an access point.