Table of Contents
Advertisement
15. Refer to the
Status
Hostname
MAC
State
Progress
Retries
Last Status
16. Select
Clear History
12.1.10 Re-elect Controller
Devices
Use the
Controller Re-election
optionally make some, or all, of the access points available to initiate tunnel connections.
NOTE: Take care when selecting access points for controller re-election, as client con-
nections may be broken on upon re-election. Ensure an elected access point's client load
can be compensated by another access point in the same RF Domain.
To re-elect controller adoption resources for tunnel establishment:
NOTE: The
hierarchal tree and is not available for access points.
1. Select
Operations.
2. Ensure a
RF Domain
elect Controller screen cannot be located, as it does not display at either the system or device levels of the hierarchal tree.
3. Select the
Re-elect Controller
tab to view the history of captive portal pages upload.
Displays the hostname of the target device.
Displays the factory assigned MAC address of the target device.
Displays the target device's state.
Displays the progress of the upload to the target device.
Displays the number of retires attempted for upload to the target device.
Displays the last known status of the upload to the target device.
to clear the history displayed in the
screen to identity available access point resources within a selected RF Domain and
Re-elect Controller
tab is only available at the RF Domain level of the UI's
is selected from the Operations menu on the top, left-hand, side of the screen. Otherwise, the Re-
tab.
Status
tab.
Operations 12 - 35
Hide quick links:
Advertisement
Table of Contents
