Motorola WiNG 5.5 Reference Manual page 699

NOTE: If selecting the Device Upgrade screen from the RF Domain level of the UI, there
is an additional
drop-down menu. Select this option to provision selected device models within the same
RF Domain from this RF Domain manager controller. If expanding a RF Domain and
selecting a member device, the upgrade tab is entitled
an upgrade is made from an elected RF Domain Manager device. There's also an addi-
tional Device Image File screen to select the device image type and set the transfer pro-
tocol.
5. Refer to the following to configure the required AP upgrade parameters:
Device Type List
Scheduled Upgrade Time
Figure 12-23 Devices - Adopted AP Upgrade screen
Upgrade from Controller option to the right of the
Select the access point model to specify which model is available to upgrade by the
Virtual Controller AP. Upgrades can only be made to the same access point model. For
example, an AP6532 firmware image cannot be used to upgrade an AP7131 model
access point. For that reason, the drop-down menu will only display the model
deployed.
To perform the upgrade immediately, select Now. To schedule the upgrade to take
place at a specified time, enter a date and time. Select whether you require an
immediate reboot once the AP is updated. If you would like a reboot later, schedule
the time accordingly. The AP must be rebooted to implement the firmware upgrade.
Select No Reboot to ensure the access point remains in operation with its current
firmware. This option is useful to ensure the access point remains operational until
ready to take it offline for the required reboot.
Device Type List
Adopted Device Upgrade, as
Operations 12 - 17