Motorola WiNG 5.5 Reference Manual page 138

5 - 52 WiNG 5.5 Access Point System Reference Guide
5. Refer to the WAN (3G) Backhaul
WAN Interface Name
Enable WAN (3G)
6. Define the following authentication parameters from within the
Username
Password
Access Point Name
(APN)
Authentication Type
7. Use the NAT Direction
Outside or None. The default is None.
Figure 5-28 Profile Interface - WAN Backhaul screen
configuration to specify the access point's WAN card interface settings:
Displays the WAN Interface name for the WAN 3G Backhaul card.
Select this option to enable 3G WAN card support on the access point. A supported 3G
card must be connected for this feature to work.
Provide username for authentication support by the cellular data carrier.
Provide password for authentication support by the cellular data carrier.
Enter the name of the cellular data provider if necessary. This setting is needed in areas
with multiple cellular data providers using the same protocols such as Europe, the Middle
East and Asia.
Use the drop-down menu to specify authentication type used by the cellular data provider.
Supported authentication options include None, PAP, CHAP, MSCHAP, and MSCHAP-v2.
field to specify the NAT direction used with the access point's WAN card. Options include Inside,
Basic Settings field: