Table of Contents
Advertisement
Sound Detection Page
Setting
Recording Time
Time to restrain the next
detection
Operating at the time of
detection
Specify the time before sound is detected or after sound is detected.
To limit unnecessary continuous detection, select the [Restraint Time] check
box, and set the deactivation time between detections.
Designate the command to be executed when sound is detected.
Details of each command are set with the [Control when event is detected]
screen. (® Page 45)
•
Start output from external output of the camera
When a detection is made, commands ([Open]/[Short]) are executed to
the external devices connected to the camera.
•
Execute optional commands
When a detection is made, optional commands are executed.
•
Pop-up the camera image
When a detection is made, a pop-up camera image of the detected
image is displayed. (® Page 35)
•
Forward
When a detection is made, a message is sent to the specified destination
address. (® Page 19)
–
Subject: Enter the notification message subject (44 characters or
less). ["] cannot be entered.
–
Image: When [Attach] is selected, detected camera images (JPEG)
are sent as E-mail attachments.
Description
Operating Instructions
2.2 Setting Cameras
41
Advertisement
Table of Contents
