Table of Contents
Advertisement
5.3 Error Message List
Message
No more images can be displayed. All
monitoring images will be stopped.
Please follow the following steps.
•
Reduce the resolution
•
Reduce the amount of cameras on
one page
Navigation
Failed to get the result from the
recording-capacity database. Try again
after a while.
Operation Support
To execute restore program, exit this
program. If the program is exited, the
camera stops recording, and the timer
stops operating. Do you want to exit this
program, and execute restore program?
The restore program stopped processing
at the following image. Please execute
the restore program again.
[Folder] ***
[Date] mm/dd/yy
The image is corrupted. Execute the
restore program.
Camera settings
Message
Camera settings
Enter a number in one-byte character in
Port.
Enter Camera Name.
Enter Camera Address.
Enter an English one-byte character in
Camera Address.
Port should be between 1 and 65535.
176
Operating Instructions
Cause and Remedy
•
There is not much usable memory left on the PC or the CPU
usage is high.
→
Please reduce the resolution in the camera settings
window. Please reduce the amount of displayed
cameras on one page
→
Wait a while and try again.
•
This software and the restore program cannot execute
simultaneously.
→
Click [OK] and exit this software to execute the restore
program.
→
Click [Execute...] and perform processing for recording
images.
•
If corruption is found in the recording image, the restore
program will be automatically activated.
→
The progress status is displayed. Wait until the
restoration is completed.
Cause and Remedy
•
When characters inadmissible characters are entered in the
port.
→
Enter a number in one-byte character in Port.
•
The Camera Name space was blank.
→
Enter Camera Name.
•
The Camera Address space was blank.
→
Enter Camera Address.
•
When the camera address consists of inadmissible
characters.
→
Enter an English one-byte character in Camera
Address.
•
A number not between 1 and 65535 was entered in the Port
field.
→
Set the port number between 1 and 65535.
Advertisement
Table of Contents
