Table of Contents
Advertisement
2.2 Setting Cameras
•
To delete a preset
Select a number below [No.], and then click [Delete].
•
To change the order of presets
The presets are displayed in numerical order.
To change the order, select a number below [No.], and then click [Move Down]/[Move Up].
Setting the preset schedule
Setting
Start/Stop
Designates start time/end
time and day of the week
Position appointment at time
of schedule end
Control after camera
operation
Note
•
Up to 30 presets can be registered.
•
For WV series network cameras and some BL series network cameras, the moving position may be
displayed with preset numbers. For 360° network cameras that have image capture mode set to quad
PTZ, the preset position is only moved for the top left screen.
•
Because when the [Hold Time] is set to short intervals it affects the operating life span of the camera,
limit the preset operating times according to the [Hold Time] value.
For WV series network cameras and some BL series network cameras, there are some models that
have no limit to the preset sequence operation time.
•
Settings cannot be performed when the preset sequence position overlaps with the timer setting
position times. (® Page 83)
•
The preset sequence can be started with
•
Movement cannot be detected while the camera is moving to the preset position.
•
The preset sequence will stop if camera operations (pan/tilt and zoom) are performed on the
multi-monitoring window while the preset sequence is running.
•
The preset sequence features of the camera cannot be used while this software's preset sequence is
running.
Setting color night view (only for cameras with color night view feature)
Color night view activation/deactivation can be registered in a schedule.
50
Operating Instructions
Set [Start] to execute the preset sequence and set [Stop] so as not to
execute preset sequence (default).
Sets the start and end time for the preset sequence, and the day of the week.
Select the check box and specify a preset to indicate the preset position
displayed when the schedule has been completed.
If cameras are operated (pan/tilt, zoom, etc.) on the Multi-monitoring screen
during preset sequence operation, the preset sequence will be stopped. Set
the preset sequence operation for after a preset sequence has been
stopped. The default setting is [Stop the Preset Sequence].
Description
, as well. (® Page 73)
Advertisement
Table of Contents
