Table of Contents
Advertisement
2.2 Setting Cameras
For example, 2010 January 1, 15:20:55 is shown as [2010/01/01 15:20:55].
Notice
•
Configure sensor detection after a sensor has been attached to the camera. Setting sensor detection
without a sensor causes a malfunction.
Setting sound detection recording (only for cameras with sound detection
feature)
Starts recording when the camera detects sound.
The recording time for sound detection recording (and so on) is set using this software.
Note
•
Only cameras with the [Data Format] set to [JPEG] on the [Image Settings] page can be configured.
(® Page 28)
An error message is displayed when the setting is [MPEG-4] or [H.264].
The data format will change to [JPEG] when you click [OK].
When the data format is set as [H.264]
•
Set the sensitivity of sound detection on the settings page for the camera.
40
Operating Instructions
Advertisement
Table of Contents
