Table of Contents
Advertisement
2.3.1 About the Application Windows
P
Pan/Tilt/Home Position
button
Q
Tele/Wide
R
Edit Camera Settings
S
Camera Portal Site
T
Manual Recording
U
Timer Recording
V
Snapshot
W
Volume control (Listen
button)
X
Volume control (Talk
button)
Y
Camera Operating
Buttons
Note
•
The camera portal site is not opened with the Camera Portal Site when the camera address is set with
an IPv6 address (® Page 24).
To open the camera portal site, register the domain names registered with the IPv6 domain name
service in the camera address.
66
Operating Instructions
Outside buttons: Click these buttons to make large movements up/down/
left/right.
Inside buttons: Click these buttons to make small movements up/down/
left/right.
button: Click this button to move the camera to the home position
registered in the camera.
Controls camera zoom.
: Zoom in (Tele)
The Settings page of the selected camera is displayed. (® Page 24)
The selected camera portal site is displayed.
When using network video encoders, or 360° network cameras that have
display mode set to quad streams, a portal screen displaying camera
images of channel 1 is automatically displayed.
A menu screen is displayed by clicking the button. Recording is started/
stopped according to the recording method which is selected. Also, all the
manual image recording of all cameras can be turned off.
A menu screen is displayed by clicking the button. Starts/stops the
selected timer recording according to the specified start and time.
Takes a snapshot with the selected camera.
Turns the speaker on/off and controls playback volume. (® Page 110)
Turns the microphone on/off and controls playback volume. (®
Page 145)
Control the basic functions of the selected camera. (® Page 73)
: Zoom out (Wide)
Advertisement
Table of Contents
