Table of Contents
Advertisement
2.2 Setting Cameras
•
Saving pop-up images
Click [Save]. The [Save As] window is displayed.
Specify the destination location, file name, and file type, and then click [Save].
•
Copying to the clipboard
Clicking [Copy To The Clipboard] copies pop-up images to the clipboard*1.
*1
The clipboard is a place to temporarily save copy and paste data in. The copied image can be used in programs such as Microsoft
Paint.
Note
•
By default, file names are generated from the camera ID and the time stamp. For example, if the camera
ID is [00001], and the time stamp is [January 1, 2010, at 9:30 AM and 20 seconds and 500 milliseconds],
the file name is [00001_20100101093020500.jpg].
•
Pop-up images are displayed even when the screen saver is active.
•
You can specify the time the pop-up image is displayed for. (® Page 45)
Setting the alarm detection method
Alarms can be set for detection patterns, the recording time, etc.
Note
•
Only cameras with the [Data Format] set to [JPEG] on the [Image Settings] page can be configured.
(® Page 28)
An error message is displayed when the setting is [MPEG-4] or [H.264].
The data format will change to [JPEG] when you click [OK].
When the data format is set as [H.264]
36
Operating Instructions
Advertisement
Table of Contents
