Table of Contents
Advertisement
2.2 Setting Cameras
Setting
Operating at the time of
detection
Note
•
Motion detection is performed by comparing images and detecting motion. The image-to-image
comparison interval is 0.5 seconds. Motion detection functions built-in to the camera are not used.
•
Check motion detection by using the motion detection monitoring window, and adjust the settings
accordingly.
•
Motion detection is not performed during pan/tilt or zoom operations.
•
You can center the camera image on the desired point by right-clicking in the motion detection
monitoring window. (® Page 70)
•
The contents of the sent E-mail is comprised of: the camera name, detection type, and the time stamp.
Time stamps are displayed as [year/month/day hour:minute:second].
For example, 2010 January 1, 15:20:55 is shown as [2010/01/01 15:20:55].
•
Some of the specifications for WV series network cameras and some BL series network cameras differ
to other cameras. See Page 161 for more information.
Disabling a monitoring area
You can specify an area of the image in which to disable motion detection. To set disabled areas, click on cells
in the motion detection monitoring window.
Selected disabled areas are darkened. You can set multiple disabled areas.
34
Operating Instructions
Designate the command to be executed when motion is detected.
Details of each command are set on the [Control when event is detected]
page. (® Page 45)
•
Start output from external output of the camera
When a detection is made, commands ([Open]/[Short]) are executed to
the external devices connected to the camera.
•
Execute optional commands
When a detection is made, optional commands are executed.
•
Pop-up the camera image
When a detection is made, a pop-up camera image of the detected
image is displayed. (® Page 35)
•
Forward
When a detection is made, a message is sent to the specified destination
address. (® Page 19)
–
Subject: Enter the notification message subject (44 characters or
less). ["] cannot be entered.
–
Image: When [Attach] is selected, detected camera images (JPEG)
are sent as E-mail attachments.
Description
Advertisement
Table of Contents
