Table of Contents
Advertisement
Message
** cannot be accessed.
•
** =
•
Save Destination Folder
•
JPEG Conversion Folder
•
MPEG Conversion File
•
Import File
•
Export File
When the software is shut down, the
camera stops recording. Any set timers
will also stop operating. Is it OK to shut
down?
The folder path exceeds 100 Characters.
Specify a path that is under 100
characters.
[Current Destination Folder]
**
There is no access right to the specified
folder. Check the folder.
Cannot be processed because of
insufficient memory left on the PC. Please
reboot the PC and use it for this program
only.
Remote Access
Message
Enter Port.
Enter a number in one-byte character in
Port.
Port should be between 1 and 65535,
except for 10083.
In order to change the settings, it is
necessary to restart the program. Do you
want to restart the program?
Enter Administrator User Name.
Enter Administrator Password.
Enter General User 1 User Name.
Enter General User 1 Password.
Cause and Remedy
•
The folder or file cannot be accessed because the drive
cannot be found or the path is not available.
→
Properly select a folder of file.
•
You do not have permission to access the specified folder.
→
Confirm that you have permission to access the
destination folder.
•
Right-click
and select [Exit].
→
Select [Yes] to shutdown.
→
Specify a path that is under 100 characters.
•
You do not have access permission to the specified folder.
→
Set the access permission of the folder.
•
Insufficient PC memory
→
Close any programs other than this program and reboot
the PC.
Cause and Remedy
•
The port number has not been entered.
→
Enter the port address.
•
When inadmissible characters are entered for the port.
→
Enter a number in one-byte character in Port.
•
A number not between 1 and 65535 or 10083 was entered
in the port.
→
Port should be between 1 and 65535, except for 10083.
•
The setting has been modified.
→
This software needs to be restarted.
•
The Admin User Name space was blank.
→
Enter Administrator User Name.
•
The Admin Password space was blank.
→
Enter Administrator Password.
•
When the general 1 user name is blank.
→
Enter General User 1 User Name.
•
When the general 1 password is blank.
→
Enter General User 1 Password.
5.3 Error Message List
Operating Instructions
183
Advertisement
Table of Contents
