Table of Contents
Advertisement
2.1 Registering the Camera
II.
Configure the settings in the [Camera Settings] page.
Camera Settings Page
Setting
Camera ID
Camera Name
Comment
Camera Address
Port
24
Operating Instructions
Automatically sets the serial number.
Enter the camera name. (Maximum 250 characters)
To display the name of the camera on the multi-monitoring window,
select the [Camera Name] check box under [Multi-Monitoring] in
[Preferences]. (® Page 103)
Enter information such as the location in order to distinguish the camera
from other cameras. (Maximum 128 characters)
A comment does not have to be entered.
Enter the IP address (or the domain name) of the camera to be
registered. (Up to 256 alphanumeric characters)
You must input the camera address.
•
IPv6 address settings are displayed in eight groups of four
hexadecimal digits, where each group is set off with [:]. Continuous
numerical zeros [0] can be abbreviated and displayed as [::].
To distinguish IPv4 addresses, set these in brackets [ ].
Example: [2001:2:3:4::5]
•
Connections to cameras which support SSL (SSL connection) can
be made with [https://camera address]. When connecting the
camera through https, set HTTPS setting of the camera to Use
HTTPS.
Enter the port number of the camera to be registered. (1 to 65535
numeric characters.)
•
You must enter the port number. The default is 80.
Description
Advertisement
Table of Contents
