Table of Contents
Advertisement
Sensor Detection Page
Setting
Recording Time
Time to restrain the next
detection
Operating at the time of
detection
Note
•
The contents of the sent E-mail is comprised of: the camera name, detection type, and the time stamp.
Time stamps are displayed as [year/month/day hour:minute:second].
Specify the time before a sensor is detected or after a sensor is detected.
To limit unnecessary continuous detection, select the [Restraint Time] check
box, and set the deactivation time between detections.
Designate the command to be executed when a sensor is detected.
Details of each command are set with the [Control when event is detected]
screen. (® Page 45)
•
Start output from external output of the camera
When a detection is made, commands ([Open]/[Short]) are executed to
the external devices connected to the camera.
•
Execute optional commands
When a detection is made, optional commands are executed.
•
Pop-up the camera image
When a detection is made, a pop-up camera image of the detected
image is displayed. (® Page 35)
•
Forward
When a detection is made, a message is sent to the specified destination
address. (® Page 19)
–
Subject: Enter the notification message subject (44 characters or
less). ["] cannot be entered.
–
Image: When [Attach] is selected, detected camera images (JPEG)
are sent as E-mail attachments.
Description
Operating Instructions
2.2 Setting Cameras
39
Advertisement
Table of Contents
