Panasonic BB-HNP17A Operating Instructions Manual page 181

Network camera recorder with viewer software ver. 4
Hide thumbs Also See for BB-HNP17A:
Table of Contents

Advertisement

Message
Keyword 2 should be 40 characters or
less.
Snapshot
A snapshot writing error has occurred.
Playback
The current minute of the recording
images cannot be played.
Maximum selected number is **. Cancel
the camera selection, and try again.
The recording is not finished so it cannot
be played back.
Record
Message
"**" has reached its recording capacity.
Delete recorded images.
**=
Camera Name
Save Destination Folder
Recording has stopped because the free
disk space is under 10%. Confirm that
there is sufficient free space on the save
destination disk.
There is only ** GB of space in the save
destination disk. Select a disk that has 1.2
GB of space or more.
Images could not be acquired for one
minute. Confirm the camera connection. In
order to stop this message being
displayed, clear the 'Display the error
message if the images could not be
acquired for one minute during recording'
checkbox in the image settings.
Cause and Remedy
The Keyword2 was more than 40 characters.
Enter Keyword 2 within 40 characters.
If a writing error occurred when saving a file, or the file has
been opened by another application.
Confirm that you have write permission for the save
destination.
Close the application that opened the file and try again.
The current minute of the recording images cannot be
played.
Cancel the camera selection and try again.
Wait for a moment and try searching again.
Cause and Remedy
The recorded images of the camera or recorded images of
the destination folder have reached the limit of recording
capacity and recording is stopped.
Delete unnecessary files to increase the recorded image
capacity.
Change the settings for the recorded image capacity
limit and set the action [Delete old files and keep
recording] for when the recorded image capacity is
reached.
Recording has been stopped because there is less than
10% remaining capacity in the destination disk or the
destination disk is not in a writable condition.
Create enough free space on the destination folder.
Confirm that there is a folder. If there is not, create it.
Check if the folder is writable, and set it writable.
Change the destination folder.
The save destination free space is less than 1.2 GB.
Select a disk with 1.2 GB or more of free space.
Check camera connection. If you do not want this message
to be displayed again, clear the "Display the error message
if the images could not been able to be acquired for one
minute during recording" in the image settings.
5.3 Error Message List
Operating Instructions
181

Advertisement

Table of Contents
loading

Table of Contents