Table of Contents
Advertisement
•
You can set the camera to record a certain number of seconds before and after a shock is detected.
Make these settings having performed actual shock detection to ascertain that the intended shock
detection is indeed taking place.
•
Shock detection commands can be selected and executed. (® Page 42)
•
A continuous image is recorded if after-shock detection recording and before-shock detection recording
overlap.
Example: You have set images to be recorded 5 seconds before and after shock detection.
5 sec.
•
Detection notifications and images captured at detections can be sent to specified E-mail addresses.
(® Page 19)
2.5.8 Timer Recording
You can specify the day of the week and period of time for recording.
10 timers can be set for each camera.
Setting Timers
1.
On the multi-monitoring window, select the camera for which to set a timer and click
5 sec.
shock is detected
1 image is recorded.
shock is detected
5 sec.
5 sec.
2.5.8 Timer Recording
.
Operating Instructions
81
Advertisement
Table of Contents
