Configuration Procedure; Adding Onus To Olt-A And Configuring The Management Service Port - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Figure 14-25 Example network of GPON access on one side and E1 or SHDSL access on the
peer side

14.4.5.2 Configuration Procedure

The following figure shows the procedure of configuring GPON access for the OLT on one side
and E1 or SHDSL access for the OLT on the peer side of the packet switched network (PSN).
The configuration steps on the 2 OLT are the same, but the methods for configuring TDM
connections on the 2 OLTs are different.
Add ONUs to OLT-A and
management service port
connection and TDM PW

14.4.5.3 Adding ONUs to OLT-A and Configuring the Management Service Port

Related configurations can be performed for ONUs only after the ONUs are successfully added
to OLT-A. After the inband management service port is created and available, you can log in to
the ONUs from the OLT to configure the ONUs.
Issue 01 (2014-04-30)
Start
configure the
Configure the TDM
Configure network
protection
Configure clock
synchronization
Verify services
End
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
14 FTTM Configuration (Base Station Access)
OLT-A
OLT-A/B
OLT-A
OLT-A/B
/ONU
1466