Configuring The Vod Service - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
l
----End

12.4.1.10 Configuring the VoD Service

The OLT is connected to the remote bridging ONU through a GPON port to provide users with
the VoD service.
Prerequisites
l
l
Data Plan
Table 12-31 Data plan
Item
ONU line profile
ONU service profile
Issue 01 (2014-04-30)
huawei(config-mvlan1000)#igmp mode proxy
Are you sure to change IGMP mode? (y/n)[n]:y
Command is being executed. Please wait...
Command has been executed successfully
6. Configure the IGMP upstream port.
Set the IGMP upstream port ID to 0/19/0 and working mode to default. Protocol
packets are transmitted to all the IGMP upstream ports in the multicast VLAN.
huawei(config-mvlan1000)#igmp uplink-port 0/19/0
huawei(config-mvlan1000)#btv
huawei(config-btv)#igmp uplink-port-mode default
Are you sure to change the uplink port mode?(y/n)[n]:y
7. (Optional) Set multicast global parameters.
In this example, the default settings are used for all the multicast global parameters.
8. Configure multicast users.
Add service ports 1 and 2 as multicast users.
huawei(config-btv)#igmp user add service-port 1
huawei(config-btv)#igmp user add service-port 2
huawei(config-btv)#multicast-vlan 1000
huawei(config-mvlan1000)#igmp multicast-vlan member service-port 1
huawei(config-mvlan1000)#igmp multicast-vlan member service-port 2
huawei(config-mvlan1000)#quit
9. Save the data.
huawei(config)#save
The ONU does not need to be configured.
The OLT is connected to the BRAS and the program source.
The ONU has been added to the OLT. For details, see
OLT.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
12 FTTO Configuration(SOHO and SME)
Data
Profile name: ftto_line
T-CONT ID: 4
GEM port ID: 13
Profile name: ftto_ser
ONU port capability set: adaptive
12.3.3 Adding an ONU to an
1177