Huawei SmartAX MA5603T Configuration Manual page 861

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Items
Rate limit on
OLT
downstream
Rate limit on
ONU upstream
port
Rate limit on
ONU
downstream
port
Remark 1: GEM port value depends on the planning of the service provider, but in principle,
use different GEM ports for different services.
Remark 2:
Table 11-4 Reference Service Bandwidth of Each service for Each User
Service
Type
Internet
access
service
VoIP
service
IPTV
service
(commo
n
program
)
Issue 01 (2014-04-30)
Management
service
No rate limit
Set ONU port rate limit or xDSL line rate limit as required. [Remark 2]
Set ONU port rate limit or xDSL line rate limit as required. [Remark 2]
Table 11-4 shows the reference service bandwidth of each service for each user.
Upstrea Downstream
m Bandwidth
Bandwi
dth
Determi Determined based on
ned the tariff package.
based on
the tariff
package.
200 kbit/ 200 kbit/s
s
/ 2.5 Mbit/schannel
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 FTTB and FTTC Solution Configuration
Internet VoIP service
access service
Configure rate No rate limit
limit by a traffic
profile as
required.
[Remark 2]
Bandwidth Description
Available bandwidth of Internet access
service = Committed bandwidth of the tariff
package - VoIP bandwidth - IPTV bandwidth
The upstream bandwidth and the downstream
bandwidth of VoIP service are symmetrical.
The actual bandwidth varies with the coding
format. This bandwidth is calculated for two
POTS ports.
IPTV service mainly occupies the
downstream bandwidth. The actual
bandwidth depends on the coding format, the
picture in picture information, 10%
bandwidth burst traffic, and the number of
programs that can be concurrently watched
by one user (in the case of multi STBs access).
The upstream bandwidth is mainly used for
IPTV service
No rate limit
836