Example: Configuring The Triple Play - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
----End
Result
After the configuration:
l
l
l

3.4 Example: Configuring the Triple Play

This topic describes how to configure the Triple Play on the MA5600T/MA5603T/MA5608T.
Triple play is a service provisioning mode in which integrated services can be provided to a user.
Currently, the prevailing integrated services include the high-speed Internet access service, voice
over IP (VoIP) service, and IPTV service.
The early broadband access provides only the high-speed Internet access service. As the Internet
is rapidly developing, it can offer much richer services, such as video (IPTV) services. The
development of multiple access modes such as ADSL2+ and VDSL2 access, and the
improvement of broadband access also lay a solid foundation for provisioning the video service.
Issue 01 (2014-04-30)
huawei(config)#interface sip 1
Are you sure to add the SIP interface?(y/n)[n]:y
huawei(config-if-sip-1)#if-sip attribute basic media-ip 10.20.10.11
signal-ip
10.20.10.11 signal-port 5060 transfer udp primary-proxy-ip1 10.20.20.100
primary-proxy-port 5060
home-domain huawei sipprofile-index 1
5. Reset the SIP interface.
Reset the SIP interface to make the SIP interface register with the IMS (and to make
the modified attributes of the SIP interface take effect) so that the SIP interface can
work in the normal state.
huawei(config-if-sip-1)#reset
Are you sure to reset SIP interface?(y/n)[n]:y
6. Confirm the service board.
Confirm the ASPB service board that carries services so that the board can work in
the normal state.
huawei(config)#board confirm 0/3
7. Configure the PSTN user data.
Add POTS users (phones 0-31) to VAG2 so that the users can go online.
huawei(config)#esl user
huawei(config-esl-user)#sippstnuser batadd 0/3/0 0/3/31 1 telno 85000000
huawei(config-esl-user)#quit
8. Save the data.
huawei(config)#save
Users of VAG1 can communicate with each other.
Users of VAG2 can communicate with each other.
Users of VAG1 and VAG2 can communicate with each other.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuring the DSLAM Services
363