Commissioning Outband Management (Snmp V3) - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide

1.4.1.2 Commissioning Outband Management (SNMP V3)

This topic describes how to implement the outband network management on the MA5600T/
MA5603T/MA5608T using the local maintenance Ethernet port (outband network management
port). This enables the U2000 to maintain the MA5600T/MA5603T/MA5608T using this
management channel. In the outband network management mode, a non-service channel is used
to transmit the management information. With the use of the non-service channel, the
management channel is separated from the service channel, which is more reliable than in the
inband network management mode.
Service Requirements
In the network as shown in
l
l
l
Figure 1-55 Example network for the outband network management
Access node
10.50.1.10/24
Figure 1-56
device.
Issue 01 (2014-04-30)
Figure
The MA5600T/MA5603T/MA5608T provides the outband network management channel
through the local maintenance Ethernet port.
A static route is used between the MA5600T/MA5603T/MA5608T and the U2000.
SNMP V3 is used (more reliable than V1 and V2, providing network security and access
control management functions).
Router
10.50.1.1/24
shows the flowchart for commissioning the outband network management on the
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1-55, the service requirements are as follows:
1 Commissioning
U2000
10.10.1.10/24
143