Huawei SmartAX MA5603T Configuration Manual page 131

Access module
Hide thumbs Also See for SmartAX MA5603T:
Table of Contents

Advertisement

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Table 1-33 Data plan for configuring the monitoring parameters of the GEPS4845
Item
EMU
Charging parameters of
the battery
Battery management
parameters
The upper/lower
temperature alarm limits
or the upper/lower
temperature test limits
Power supply load power-
off and battery set power-
off parameters
Power distribution
parameters
Battery discharging test
parameters
Power rectifier module
parameters
Issue 01 (2014-04-30)
Data Plan for the F01D500 Cabinet
Type: POWER4845
SN: 0
Subnode ID: 0
The subnode ID must be the same as the subnode setting of the
corresponding DIP switches on the EMU, but the subnode ID
must be different from IDs of the other subnodes on the same
bus.
Charging mode of the battery: automatic
Equalized charging voltage of the battery: 56.5 V
Float charging voltage of the battery: 53.5 V
Current-limiting coefficient for battery charging: 0.15
Interval of battery equalized charging: 60 days
Number of battery sets: 1
Capacity of the battery set: 150 AH
The battery capacity is configured according to the actual value.
the F01D500 cabinet uses the 2 * 75 AH or 2 * 92 AH batteries.
Upper temperature threshold of the battery set: 60°C
Lower temperature threshold of the battery set: -40°C
Temperature compensation coefficient of the battery set: 100 mV
Load power-off permission status: forbid
Battery set power-off permission status: permit
Load power-off voltage: 44 V
Battery set power-off voltage: 43 V
AC overvoltage alarm threshold of the power supply: 280 V
AC undervoltage alarm threshold of the power supply: 180 V
DC overvoltage alarm threshold of the power supply: 58 V
DC undervoltage alarm threshold of the power supply: 45 V
Battery auto-discharging test: auto-test
Battery set auto-discharging test permission status: permit
Battery auto-discharging test period: 60d
The number of the power rectifier modules: 0
The number of the power rectifier modules is configured
according to the actual value. GEPS4845 supports up to 3
rectifier modules.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Commissioning
106

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smartax ma5600tSmartax ma5608t

Table of Contents