Factory Defaults Of The Xdsl Alarm Profile - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Profile
Index

1.6.3.2 Factory Defaults of the xDSL Alarm Profile

The following
profile on the MA5600T/MA5603T/MA5608T.
Table 1-53 ADSL alarm profile
Profil
e
Index
1
Issue 01 (2014-04-30)
Profile Parameter
G.SHDSL minimum line rate
(unit:kbps)
G.SHDSL maximum line rate
(unit:kbps)
PSD
Transmission mode
Remote enable
Probe enable
Downstream current target SNR margin 6
Downstream worst target SNR margin
Upstream current target SNR margin
Upstream worst target SNR margin
Target SNR margin used bitmap
Reference times
Table 1-53, Table 1-54,
Profile Parameter
DEFV CO The number of forward error correction
AL seconds
The number of errored seconds
The number of severely errored seconds
The number of loss of signal seconds
The number of unavailable seconds
CPE The number of forward error correction
seconds
The number of errored seconds
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table 1-55 list the factory defaults of the xDSL alarm
1 Commissioning
Factory Default
2048
2048
symmetric
all
enabled
disabled
0
6
0
0x5
0
Factory
Default
0
0
0
0
0
0
0
207