Configuring The Internet Access Service (Vdsl2 Access, On The Onu) - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
l This example uses the default ADSL2+ line profile (ID: 1024).
Step 6 (Optional) Configure an ADSL2+ alarm profile.
This example uses the default ADSL2+ alarm profile (ID: 1).
Step 7 Bind an ADSL2+ line profile and an ADSL2+ alarm profile, and activate the ADSL2+ port.
For example, bind ADSL2+ line profile 1024 and ADSL2+ alarm profile 1, and activate ADSL2
+ port 0/2/0.
huawei(config)#interface adsl 0/2
huawei(config-if-adsl-0/2)#deactivate 0
huawei(config-if-adsl-0/2)#alarm-config 0 1
huawei(config-if-adsl-0/2)#activate 0 profile-index 1024
----End

11.3.2.7 Configuring the Internet Access Service (VDSL2 Access, on the ONU)

This topic describes how to configure the Internet access service for home gateway (HGW) users
on an optical network unit (ONU) when HGWs are connected upstream to the ONU in VDSL2
mode.
Context
VDSL2 ports working in normal mode (that is, TR129 mode) need to bind the VDSL2 line
template and VDSL2 alarm template. For the functions and configurations of each profile, see
Table
Table 11-12 VDSL2 template
Templ
ate
Type
VDSL2
line
template
Issue 01 (2014-04-30)
11-12.
Function
A VDSL2 line template consists of a
VDSL2 line profile and a VDSL2
channel profile. When a VDSL2 port is
activated, the central office (CO) and
the customer premises equipment
(CPE) negotiate based on the
parameters configured in the VDSL2
line template, to determine whether the
VDSL2 port can work in the normal
state in these conditions.
A VDSL2 line profile provides the
following parameters: line
transmission mode, adaptation mode of
upstream/downstream transmit rates,
signal-to-noise ratio (SNR) margin,
upstream power back-off (UPBO), and
downstream power back-off (DPBO).
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 FTTB and FTTC Solution Configuration
Configuration
The system has one default VDSL2 line
template (template 1), which is used for
activation of common VDSL2 ports.
l To query: display vdsl line-
template
l To add: vdsl line-template add or
vdsl line-template quickadd
l To query: display vdsl line-profile
l To add: vdsl line-profile add or
vdsl line-profile quickadd
894