Huawei SmartAX MA5603T Configuration Manual page 431

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
2.
3.
Step 8 Create an ATM access service stream.
ATM cells must be encapsulated into ATM over Ethernet (AOE) packets before being carried
by PWs. That is, create an ATM service stream.
l Create AOE service streams in batches for UBR services.
The service board is in slot 0/2, VPI/VCI is 0/35, and the traffic profile for the upstream and
downstream directions is 20.
huawei(config)#multi-service-port vlan aoe board 2 vpi 0 vci 35 inbound
traffic-table index 20 outbound traffic-table index 20
l Create AOE service streams in batches for VBR services.
The service board is in slot 0/3, VPI/VCI is 0/35, and the traffic profile for the upstream and
downstream directions is 21.
huawei(config)#multi-service-port vlan aoe board 3 vpi 0 vci 35 inbound
traffic-table index 21 outbound traffic-table index 21
l Create AOE service streams in batches for CBR services.
The service board is in slot 0/4, VPI/VCI is 0/35, and the traffic profile for the upstream and
downstream directions is 22.
huawei(config)#multi-service-port vlan aoe board 4 vpi 0 vci 35 inbound
traffic-table index 22 outbound traffic-table index 22
Step 9 Bind the PVCs to PW 20 in batches to create an ATM PWE3 service.
Since the VPI/VCI parameters of cells on PVCs at different ports are the same, the VPI/VCI
parameters must be changed once before the cells on client-side PVCs are encapsulated into
PWs. This ensures that the VPI/VCI parameters are unique for cells on each PVC in the PW.
l Bind PVCs and PWs in batches for UBR services.
huawei(config)#multi-pw-ac-binding pvc board 2 vpi 0 vci 35 from-outvpi 0 outvci
32
from-invpi 1 invci 32 pw 20 static transmit-label 8450 receive-label 8460
l Bind PVCs and PWs in batches for VBR services.
huawei(config)#multi-pw-ac-binding pvc board 3 vpi 0 vci 35 from-outvpi 0 outvci
33
from-invpi 1 invci 33 pw 21 static transmit-label 8451 receive-label 8461
l Bind PVCs and PWs in batches for CBR services.
huawei(config)#multi-pw-ac-binding pvc board 4 vpi 0 vci 35 from-outvpi 0 outvci
34
from-invpi 1 invci 34 pw 22 static transmit-label 8452 receive-label 8462
Issue 01 (2014-04-30)
huawei(config)#traffic table ip index 20 cir off color-policy cos priority
user-cos 1 priority-policy tag-in-package
NOTE
l The color policy in the upstream and downstream traffic profiles must be the same.
l If the color policy is cos-remark, the priority policy must be tag-in-package for the downstream
direction.
For VBR services, set the upstream traffic profile to 21, CIR to off, color policy to CoS,
user-side packet mapping mode to outer-layer 802.1p, default 802.1p to 4, and priority
policy to tag-in-package.
huawei(config)#traffic table ip index 21 cir off color-policy cos priority
user-cos 4 priority-policy tag-in-package
For CBR services, set the upstream traffic profile to 22, CIR to off, color policy to CoS,
user-side packet mapping mode to outer-layer 802.1p, default 802.1p to 5, and priority
policy to tag-in-package.
huawei(config)#traffic table ip index 22 cir off color-policy cos priority
user-cos 5 priority-policy tag-in-package
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Configuration Example of the Private Line Service
406