Planning Data - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
SN

1.2.4 Planning Data

This topic describes the information to be collected about the hardware configuration,
networking, and data plan before the commissioning based on the engineering document. This
facilitates the data configuration.
Table 1-4
Table 1-4 Data checklist
SN
1
2
3
Issue 01 (2014-04-30)
Item Description
One optical multiplexer/demultiplexer
One data network performance
analyzer
lists the data collected for the commissioning.
Item
Hardware
configuration
Networking and data
plan
DIP Switches
configuration
NOTE
Only the MA5600T
supports this operation.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
This includes but is not limited to the following:
l Types and slot distribution of the control board and
service boards
l Types and physical positions of the upstream ports
and the service ports
This includes but is not limited to the following:
l Networking mode
l IP address assignment
l VLAN planning
l For details about the default settings of DIP switches
on the ESC board on the MA5600T, see
Checking the Settings of DIP Switches on the
H801ESC Board.
l For details about the default settings of DIP switches
on the fan monitoring board on the MA5600T, see
1.3.1.2 Checking the Settings of DIP Switches on
the Fan Monitoring
1 Commissioning
Remarks
Used to test the input optical
power of a single-fiber bi-
directional optical port. It is a
meter with the multiplexing
and demultiplexing functions.
Used to test the input optical
power. It is used to transmit
data to simulate the
networking environment.
1.3.1.1
Board.
6