Example: Configuring The Xdsl Ipoa Internet Access Service - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Configuration File for the SHDSL access mode:
vlan 50 smart
port vlan 50 0/19 0
port vlan 50 0/19 1
link-aggregation 0/19 0 0/19 1 egress-ingress workmode lacp-static
shdsl line-profile quickadd 3 line four-wire rate 2048
interface shl 0/3
deactivate 1
activate 1 3
alarm-config 1 1
quit
service-port 2 vlan 50 shdsl mode atm 0/3/1 vpi 1 vci 39 inbound traffic-table index
5 outbound traffic-table index 5
service-port desc 2 description MA5600T/MA5603T/MA5608THW/Vlanid:50/shdsl/smart
mac-address max-mac-count service-port 2 16
mac-pool xpoa 0000-1111-1010 300
pppoa enable
encapsulation 0/3/1 vpi 1 vci 39 type pppoa llc
pitp enable pmode
raio-mode cntel pitp-pmode
save
Configuration File for the VDSL access mode:
vlan 50 smart
port vlan 50 0/19 0
port vlan 50 0/19 1
link-aggregation 0/19 0 0/19 1 egress-ingress workmode lacp-static
vdsl line-profile quickadd 3 snr 60 0 300 60 0 300
vdsl channel-profile quickadd 3 path-mode atm interleaved-delay 8 2 inp 4 2 rate
128 10000 128 10000 2048 2048
interface vdsl 0/4
deactivate 1
activate 1 template-index 3
alarm-config 1 1
quit
service-port 3 vlan 50 vdsl mode atm 0/4/1 vpi 1 vci 39 inbound traffic-table index
5 outbound traffic-table index 5
service-port desc 3 description MA5600T/MA5603T/MA5608THW/Vlanid:50/vdsl/smart
mac-address max-mac-count service-port 3 16
mac-pool xpoa 0000-1111-1010 300
pppoa enable
encapsulation 0/4/1 vpi 1 vci 39 type pppoa llc
pitp enable pmode
raio-mode cntel pitp-pmode
save

3.1.4 Example: Configuring the xDSL IPoA Internet Access Service

On a fiber to the x (FTTx) network, if the MA5600T/MA5603T/MA5608T provides x digital
subscriber line (xDSL) services for broadband users and the users connect to the Internet in IP
over ATM (IPoA) mode, you can configure the MA5600T/MA5603T/MA5608T by referring
to this topic to provide users with high-speed Internet (HIS) services. The MA5600T/MA5603T/
MA5608T functions as an optical network unit in this service. IPoA is generally used on a private
line network to meet operators' requirements for transferring from an asynchronous transfer
mode (ATM) network to the IP network. An authentication is generally not required for IPoA
users.
Service Requirements
l
Issue 01 (2014-04-30)
The user accesses the Internet in the IPoA mode.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuring the DSLAM Services
273