Huawei SmartAX MA5603T Configuration Manual page 979

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Item
Procedure
Step 1 Log in to and configure the ONU.
You can remote log in to the ONU from the OLT to perform the configuration. The user name
is root and the password is mduadmin.
Step 2 Configure the upstream VLAN interface.
Specify the upstream VLAN interface for the media stream and the signaling flows and configure
the IP addresses of the Layer 3 interface. These IP addresses are the sources of the IP address
pools for the media stream and the signaling flows.
1.
2.
3.
Step 3 Configure the media and signaling IP address pools.
Configure both the media IP address and signaling IP address to 10.10.10.10 and the MG IP
address to 10.10.10.1.
huawei(config)#voip
huawei(config-voip)#ip address media 10.10.10.10 10.10.10.1
huawei(config-voip)#ip address signaling 10.10.10.10
huawei(config-voip)#quit
NOTE
Step 4 Configure static routes.
Because the IP address of the VLAN interface and the IP address (200.200.200.200/24) of the
MGC are in different network segments, you need to configure a route for the network segment
from gateway 10.10.10.1 to 200.200.200.0.
huawei(config)#ip route-static 200.200.200.0 24 10.10.10.1
Step 5 Add an MG interface.
Issue 01 (2014-04-30)
Ringing current attribute
Create an upstream VLAN.
The VLAN ID is 200 and the VLAN is a smart VLAN.
huawei(config)#vlan 200 smart
Add the upstream port to the created upstream VLAN.
Add upstream port 0/0/1 to VLAN 2000.
huawei(config)#port vlan 200 0/0 1
Configure the IP address of the Layer 3 interface.
Enter the VLAN interface mode and configure the lP address of the Layer 3 interface to
10.10.10.10
huawei(config)#interface vlanif 200
huawei(config-if-vlanif200)#ip address 10.10.10.10 24
huawei(config-if-vlanif200)#quit
l You can configure the attributes of the MG interface only when the media IP address and the signaling
IP address exist in the media and signaling IP address pools.
l The media IP address can be different from the signaling IP address. Plan the data according to actual
networking.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 FTTB and FTTC Solution Configuration
Data
Default value
954