Configuring The H.248-Based Voice Service (Through The Cli) - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
----End

9.7.3.6 Configuring the H.248-based Voice Service (Through the CLI)

The OLT manages ONTs and applies VoIP configurations to the ONT using the OMCI protocol.
This topic describes how to configure the H.248-based voice service.
Prerequisites
l
l
l
l
l
Context
Item
ONT line profile
Issue 01 (2014-04-30)
d. Click OK. The configurations take effect without the requirement of resetting
the ONT.
The interface data and POTS user configuration data corresponding to the MG interface
have been configured on the MGC.
The OLT has been connected to the MGC. The OLT can ping the IP address of the MGC
server successfully.
The ONT has been added to the OLT. For details, see
OLT.
Different voice services require different ONT software versions. Before the configuration,
ensure that the current ONT software version supports H.248. For details, see relevant ONT
manuals.
The ONT software version of the H.248 voice service can be configured as V100R002C04
or later through the CLI.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Data
Profile name: ftth
T-CONT ID: 4
GEM port ID: 12
9 FTTH Configuration
9.7.1.3 Adding an ONT to an
679