Huawei SmartAX MA5603T Configuration Manual page 597

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Item
Voice user
configuratio
n data
Issue 01 (2014-04-30)
Coding
Transmission mode
Home domain (SIP)
Profile index
The version of H248 protocol
that MG starts to negotiate
Phone number
Terminal ID (H248)
User priority
User type
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 FTTH Configuration
Description
Choose the coding method according to the
requirement on the MGC/IMS side.
Generally, the text coding method is adopted.
Choose the transmission mode according to
the requirement on the MGC/IMS side.
Generally, the UDP transmission mode is
adopted.
-
-
V1, V2 or V3 (by default). The interface may
fail to be registered because some
softswitches do not support V3.
For H248 protocol: The phone numbers
allocated by the MGC need to be determined,
and the paging numbers for users' emergency
standalone need to be planned if the
emergency standalone function is provided.
For SIP protocol: The phone number that the
IMS core network device allocates to the user
must be configured.
If the TID template with which the POTS
user is bound does not support terminal
layering, this parameter needs to be
configured.
According to the service requirements, user
priorities must be specified. The user
priorities include the following:
l cat1: government1 (category 1
government users)
l cat2: government2 (category 2
government users)
l cat3: common (common users)
According to the service requirements, user
type needs to be specified. The user type
includes the following:
l DEL: direct exchange lines (default)
l ECPBX: earth calling PBX
l LCPBX: loop calling PBX
l PayPhone: pay phone
572