Huawei SmartAX MA5603T Configuration Manual page 122

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Table 1-29 Commands for configuring the EPS75-4815AF
To...
Add an EMU
Query the configuration
parameters of the power system
Query the power environment
parameters
Query the alarm information of
the power supply
Configure the battery charging
parameters
Configure the battery
management parameters
Configure the upper/lower
temperature alarm limits or the
upper/lower temperature test
limits
Configure the battery set power-
off parameters
Configure the power distribution
parameters
Configure the battery
discharging test parameters
Configure the parameters for the
power rectifier module
Configure the battery high-
temperature power-off
parameters
Configure the environment
monitoring parameters
Configure the external extended
digital parameters
1.
2.
3.
4.
5.
Issue 01 (2014-04-30)
Log in to the device through the maintenance terminal and add an EMU.
Query the status of the EPS75-4815AF.
Enter the environment monitoring configuration mode and query the default configuration.
Configure the battery management parameters.
Configure the battery discharging test parameters.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Run the Command...
emu add
display power system parameter
display power environment parameter
display power alarm
power charge
power battery parameter
power battery temperature
power off
power supply-parameter
power battery-test
power module-num
power temperature-off
power environment
power outside-digital
1 Commissioning
97