Huawei SmartAX MA5603T Configuration Manual page 226

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
----End
Reference
l
l
l
Issue 01 (2014-04-30)
Figure 1-86 Setting TFTP parameters
Any PC that runs the TFTP software can serve as a TFTP server.
The IP address in the Server interfaces drop-down list is the IP address of the TFTP server.
The TFTP application can identify the IP address automatically. If the TFTP server has
multiple IP addresses, select the correct one.
If the TFTP file transfer fails, check the following items:
– Whether the selected IP address of the TFTP server is correct.
– Whether the TFTP server can ping the inband or outband Ethernet port of the MA5600T/
MA5603T/MA5608T (run the Ping command).
– Whether the TFTP application is run on the TFTP server.
– Whether the path is correctly set in the TFTP application.
– Whether the TFTP file transfer function has been enabled through the command.
– Whether the entered name of the file to be transferred is correct.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Commissioning
201