Preparing Software - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
SN
3
4

1.2.2 Preparing Software

This topic describes how to prepare the software required before the commissioning. This
facilitates the subsequent commissioning.
Table 1-2
Table 1-2 Software checklist
SN
1
2
Issue 01 (2014-04-30)
Item Description
Upper-layer Ensure that the upper-layer device meets the following
device requirements:
l The position of the interconnection port of the upper-layer
device is correct.
l The upper-layer device works in the normal state and can be
used for the commissioning.
Board The board (daughter board) selected should meet the
(daughter requirements for the external ports.
board)
NOTE
l Different boards (daughter boards) provide different external ports.
l During the system startup, you are not allowed to install or remove
shows the software checklist before the commissioning.
Item Description
Software Ensure that files in the software package for the commissioning
package are complete and the software version is correct.
Software Ensure that all the commissioning tools are available. The
commissioning common commissioning tools are as follows:
tools
l HyperTerminal (provided by the Windows OS): used for
l TFTP, SFTP, and FTP tools: used for loading software.
l Client software key generator Puttygen.exe, client software
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
For details about the boards and their external ports on the MA5600T/
MA5603T/MA5608T, see Board Overview of the MA5600T/
MA5603T/MA5608T Hardware Description.
any boards.
logging in to the MA5600T/MA5603T/MA5608T through
the CLI.
They can be downloaded from
support.huawei.com. You are advised to use SFTP tools.
key convertor sshkey.exe and SSH client software
putty.exe: used for logging in to the MA5600T/MA5603T/
MA5608T through the SSH.
1 Commissioning
http://
4