Adding An Onu To An Olt - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide

10.6.1.3 Adding an ONU to an OLT

Services can be configured for an optical network unit (ONU) only after the ONU is added to
an optical line terminal (OLT).
Data Plan
Table 10-2 Data plan
Item
DBA profile
ONU line profile
ONU service
profile
Network
topology data
Procedure
Step 1 Configure GPON ONU profiles.
GPON ONU profiles include the DBA profile, line profile, service profile, and alarm profile.
l DBA profile: A DBA profile describes GPON traffic parameters. A T-CONT is bound to a
DBA profile for dynamic bandwidth allocation, improving upstream bandwidth utilization.
l Line profile: A line profile describes the binding between the T-CONT and the DBA profile,
the QoS mode of the traffic stream, and the mapping between the GEM port and the ONU-
side service.
l Service profile: A service profile provides the service configuration channel for the ONU
that is managed by using optical network terminal management and control interface
(OMCI).
l Alarm profile: An alarm profile contains a series of alarm thresholds to measure and monitor
the performance of activated ONU lines. When a statistical value reaches the threshold, the
host is notified and an alarm is reported to the log host and the NMS.
1.
Issue 01 (2014-04-30)
Data
Profile name: fttd_dba
Profile type: type3
Assured bandwidth: 8 Mbit/s
Maximum bandwidth: 20 Mbit/s
Profile name: fttd
T-CONT ID: 4
GEM port ID for the management service: 11
GEM port ID for the voice service: 12
GEM port ID for the video service: 13
GEM port ID for the Internet access service: 14
Profile name: fttd
ONU port capability set: one VSDL2 port and two POTS ports
PON port: 0/1/0
ONU IDs: 1
Configure a DBA profile.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 FTTD Configuration
744