Verifying Services - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
----End

11.3.4.16 Verifying Services

This topic describes the remote verification methods in the FTTB+HGW scenario (HGW
providing the VoIP service). ONUs provide remote service verification methods including
PPPoE dialup emulation and multicast emulation for configuration and commissioning
engineers to verify services remotely after service configuration, avoiding a second on-site
operation.
Prerequisites
ONUs and upper-layer devices are connected properly. The BRAS and MGC/IMS have been
configured.
Context
This topic describes the remote verification method for different service.
NOTE
The VoD service and HGW VoIP service currently do not support remote verification.
Remote
Service
Verificati
on
Method
PPPoE
dialup
emulation
Issue 01 (2014-04-30)
Parameter
User
password
3. Restart the HGW.
Choose Management > Device Management and click Restarting the Device.
Function
An ONU emulates a PPPoE user
terminal software to perform dialup
and interact with the BRAS to verify
the connectivity between the ONT and
BRAS.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 FTTB and FTTC Solution Configuration
Value
-
Remarks
l PPPoE dialup emulation requires a
l A user name, password, and
l An ONU supports a maximum of
service flow which does not
belong to a QinQ VLAN.
authentication mode must be
configured on the BRAS for the
PPPoE dialup emulation.
one PPPoE dialup emulation.
1019