Verifying Services - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
l
----End

14.4.6.5 Verifying Services

Verifying private line services requires a dedicated E1 line test instrument.
Prerequisites
The configuration of private line services has been completed.
Context
Because E1 access is applied to both sides of the packet switched network (PSN), an E1 line test
instrument can be used to verify services. The E1 line test instrument is connected to the E1 port
Issue 01 (2014-04-30)
Run the display clock source system command to query the configurations and status
of the clock source. Ensure that the configurations of the system clock source are
correct and the status of the system clock source is Normal.
huawei(config)#display clock source system
-------------------------------------------------------------------------
-----
Index Board
Selected
-------------------------------------------------------------------------
-----
0 H801GICK 0/19/0
YES
-------------------------------------------------------------------------
-----
Run the display clock mode command to query the working mode of the clock. Ensure
that the working mode of the clock daughter board is Tracing.
huawei(config)#display clock mode
Clock manage-mode:Third-mode
Clock subboard work-mode:Tracing
Configure the ONU-side clock.
1. Configure the PON line clock as the system clock.
huawei(config)#clock source 0 0/0/1
huawei(config)#clock priority system 0
2. Query the configuration and status of the system clock source.
Run the display clock source command to query the configuration and status of the
system clock source.
huawei(config-if-tdm-0/1)#quit
huawei(config)#display clock source
--------------------------------------------------------------------
Index Type Source
--------------------------------------------------------------------
0 line 0/0/1
1 -- -/ -/ -
2 -- -/ -/ -
3 -- -/ -/ -
4 -- -/ -/ -
5 -- -/ -/ -
6 -- -/ -/ -
7 -- -/ -/ -
8 -- -/ -/ -
9 -- -/ -/ -
--------------------------------------------------------------------
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
14 FTTM Configuration (Base Station Access)
Source Clk-type State
ETH Normal
State
Normal
---
---
---
---
---
---
---
---
---
Priority QL
0 ---
Priority QL Selected
0 ---
--- NO
--- NO
--- NO
--- NO
--- NO
--- NO
--- NO
--- NO
--- NO
YES
---
---
---
---
---
---
---
---
---
1484