Adding Onus To Olt - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide

13.3.3.3 Adding ONUs to OLT

This topic describes how to add ONUs to the OLT. ONUs can be configured only after they are
added to the OLT successfully.
Context
l
l
Data Planning
Table 13-5 Key data plan
Configurati
on Item
DBA profile
Line profile
Networking
data
Procedure
Step 1 Configure GPON ONU profiles.
1.
2.
Issue 01 (2014-04-30)
When adding ONUs, you need to bind related profiles to the ONUs, including the DBA
profile, line profile, and alarm profile.
An ONU can be added in two modes: offline addition and online confirmation. Select either
mode as required.
Data
Profile ID: 20
Profile type: Type 3
Assured bandwidth: 100 Mbit/s
Maximum bandwidth: 120 Mbit/s
Profile ID: 10
T-CONT ID: 4
GEM port ID for management service: 11
GEM port ID for other services: 12
PON port: 0/3/1
ONU parameters:
l ONU ID: 1
l SN: 32303131B39FD641
Configure a DBA profile.
huawei(config)#dba-profile add profile-id 20 type3 assure 102400 max 122880
Configure an ONU line profile.
huawei(config)#ont-lineprofile gpon profile-id 10
huawei(config-gpon-lineprofile-10)#tcont 4 dba-profile-id 20
to DBA profile 20
huawei(config-gpon-lineprofile-10)#gem add 11 eth tcont 0
huawei(config-gpon-lineprofile-10)#gem add 12 eth tcont 4 //Add GEM port 12 to
T-CONT 4
huawei(config-gpon-lineprofile-10)#gem mapping 11 0 vlan 8
huawei(config-gpon-lineprofile-10)#gem mapping 12 1 vlan 300 //Map GEM port 12
to CVLAN 300
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
13 FTTO Configuration (Large-sized Enterprise Access)
//Bind T-CONT 4
1301